Creative Craft Supplies Since 1949
Tel: (888) 937-2723

/* end head */

Home : Instructional Guides :

Evenheat Ceramic Kiln Controls

The TAP Controller features a touch-screen design that offers a large screen with full text. All commands and menu items are legible, easy to read and easy to operate. Simply respond to the screen with a touch!

The TAP Controller is supplied pre-loaded with firing schedules as well allowing the artist to create and store their own custom programs. 

On-the-fly features such as adding time to a hold, adding temperature to a hold and skipping ahead are available and easy to uses.

The TAP Controller allows for wi-fi connection via our well-placed USB and ethernet ports. This connectivity allows the artist to monitor the kiln, develop and edit programs and perform TAP Controller functions from a networked computer, tablet or mobile device. Web-based apps are also available.



The Rampmaster II is Evenheat's full-featured automatic temperature control for ceramic firing and features our Cone Fire Mode for easy and effortless ceramic programming. Simply choose your cone number and firing speed and the Rampmaster II automatically creates your ceramic firing program.

The Rampmaster II also allows the artist to develop up to 6 individual firing programs using Ramp Mode programming for full artistic control of all firing parameters. Each firing progrm offers up to 87 segments per progranThe Rampmaster II also contains a group of special features designed to enhance your firing experience.

The Rampmaster II is supplied on all Rampmaster equipped ceramic kilns.

The Swing View Adjustable Control is a pivoting, swing-up enclosure that allows the user to rotate the Rampmaster Control to a comfortale viewing and programming angle. 

SET-PRO with Express Mode:
The SET-PRO with Express Mode is Evenheat's easy to use 3 button temperature controlo.

It allows the artist to program their GLASS firings using your glass COE, firing style and firing speed. It's quick, easy and accurate. For more advanced firing, the Set-Pro also allows you to define all the firing details using the Custom Mode. Whether you're a beginner or seasoned veteran the Set-Pro with Express Mode has you covered with features and reliable operation.

On-the-fly features allow you to add time and temperature to your holds along with a skip-ahead feature.

The Set-Pro with Express Mode is standard equipment on the Studio-Pro STP, Studio-Pro 14, Fishbone, Kingpin 88, TGK GT 4050, Hot Shot and Knife Ovens. It's also available as an option on most Rampmaster equipped Glass Kilns and Rampmaster II equipped Ceramic Kilns.

KILN SITTER with Limit Timer:
Evenheat's Classic Series Kilns are equipped with a Kiln Sitter with Limit Timer.

The Sitter is a mechanical device that uses a pyrometric cone to shut6 the firing off at the exact point that ware maturity is achieved.

Evenheat uses Kiln Sitter and Kiln Sitter Components produced for original W.P. Dawson tooling and specifications. You can be assured of quality and performance. Evenheat does not use secondary or aftermarket components.

The Infinite Switch is a manually operated switch that controls the heat produced by the heating elements. It's settable from Low to High and all points in between.

Evenheat's Classic Series Ceramic Kilns are often built using a simple toggle (On/Off) switch. Each Toggle Switch allows you to manually control each heating element.

The optional Power Interrupt Switch automatically turns off power to all heating elements in your kiln when the lid is opened and will then turn them back on once the lid is colsed. The switch used for this feature is a true safety switch and is designed specifically for safety applications. Those wishing to enter the kiln during firing should strongly consider requesting this option as an added safety measure.

Considered better than a hood, because the VentMaster actually improves firing conditions in the kiln while removing essentially all fumes from the kiln room. The VentMaster does not transfer any vibration to your kiln, is capable of venting two kilns at once and is easy to install.
The Orton VentMaster includes the main motor and blower housing, a three foot section of high temperature hose, a collector cup, multiple hose clamps, installation instructions and sample cones for test firing. The motor can be kept on the floor or mounted to the wall. If placement under kiln is obstructed, the collector cup can also be attached to the side of the kiln.

Evenheat's optional "KISS" software/hardware by Bartlett allows you to program, monitor, collect firing data and start/stop your kiln using your PC. Control and monitor up to 50 kilns equipped with the Rampmaster controller.


DYNA-LIFT Lid Lift Assist:
The DYNA-LIFT lightens the force needed to open and close your kiln's heavy lid. It does so with ease and grace and with no negative effects upon the kiln itself. Hallmarks of the design include no kiln body connection, single point lifting and emphasis on allowing the lid to act naturally. 
The Dyna-Lift attaches directly to the kiln stand and lid handle. All Evenheat kilns able to use the Dyna-Lift have been built as "Dyna-Lift Ready" since July 2011. Simply attach to your kiln stand and lid handle and you're ready to go. It's that easy to install!
Note: If your kiln was built prior to July 2011 you will need a new stand that is designed to accept the Dyna-Lift. 
The Dyna-Lift is NOT designed to fit other kiln brands.

Evenheat RM Series Kilns

Evenheat Glass Kilns

Evenheat High Fire Series Kilns

Evenheat Kiln Parts

Portable Kilns by Paragon

Glass Fuser Kilns by Cress Mfg.

National Artcraft Co.
300 Campus Drive, Aurora, Ohio 44202 USA
Toll-Free Phone: 888-937-2723   |   Toll-Free Fax: 800-292-4916
Outside USA Phone: 330-562-3500   |   Outside USA  Fax: 330-562-3507
Hours: M-F 8:30 a.m. to 5:00 p.m., ET
Connect with us:
All contents © National Artcraft Company. The products depicted on this website are subject to Proposition 65 labelling in California. For more information go to